ALFUN a.s.

Aluminium plates

Standards:

 

Technical terms of deliveries

EN 485-1

Dimensional and shape deviation tolerances

EN 485-3

 

Dimensions in mm:Trimming / plate
Thickness 5 - 300*
Width 20 - 1 520*
Length 40 - 3 020*

*other thicknesses and dimensions on your request

Thickness cutting tolerances:

  • up to 160 mm: +/- 0,3 mm
  • over 160 mm: -0/+5 mm

 

Specification of selected alloys:

Type of plateAlloy designationTemperMechanical propertiesAvailability
(mm)
According to EN According to DINAccording to PNChemicalRm (min) (MPa)Rp0,2
(MPa)
Hardness
(HB)
Cast sawed mould plates (rough surface intended for machining) ENAW 5083 3.3547 PA13 AlMg4,5Mn0,7 Soft 250 120 75 Stock
20-300
ENAW 7021 -- -- AlZn5,5Mg1,5 Hardened 390 340 125 Stock
12-200
Cast sawed precision milled plates (machined surface, protective foil on the both-sides) ENAW 5083 3.3547 PA13 AlMg4,5Mn0,7 Soft 250 120 75 Stock
5-120
ENAW 7021     AlZn5,5Mg1,5 Hardened 390 340 125 Stock
12-100
Rolled plates (common rolled surface) ENAW 5754 3.3535 PA11 AlMg3 Soft 190 80 50 Stock
5-120
ENAW 5083 3.3547 PA13 AlMg4,5Mn0,7 Soft 250 120 75 Stock
5-100
ENAW 6061 -- -- AlMg1SiCu Hardened 290 240 105 Stock
6-130
ENAW 6082 3.2315 PA4 AlSiMgMn Hardened 300 240 95 Stock
5-180
ENAW 2017 3.1325 PA6 AlCuMg1 Hardened 380 240 105 Stock
5-100
ENAW 2024 3.1355 -- AlCuMg2 Hardened 390 250 110 Stock
8-80
ENAW 7022 3.4345 -- AlZn5Mg3Cu Hardened 550 470 165 Stock
6-280
ENAW 7075 3.4365 PA9 AlZn5,5MgCu Hardened 550 450 170 Stock
5-180
Rolled precision milled plates (machined surface, protective foil on the both-sides) ENAW 5754 3.3535 PA11 AlMg3 Soft 190 80 50 To order
5-100
ENAW 5083 3.3547 PA13 AlMg4,5Mn0,7 Soft 250 120 75 Stock
5-100
ENAW 6082 3.2315 PA4 AlSiMgMn Hardened 300 240 95 Stock
8-100
ENAW 2017 3.1325 PA6 AlCuMg1 Hardened 380 240 105 Stock
8-100
ENAW 7019 -- -- AlZn4Mg2Mn Hardened 420 365 130 Stock
8-60
ENAW 7075 3.4365 PA9 AlZn5,5MgCu Hardened 550 450 170 Stock
8-100

 

Other characteristics:

Type of plateAlloy designationOther characteristics 1-5; 1 = the best
According to ENAccording to DINAccording to PNChemicalMachin-abilityWeld-abilitySuitable for anodising processCorrosion resistanceHarden-ability
Cast sawed mould plates (rough surface intended for machining) ENAW 5083 3.3547 PA13 AlMg4,5Mn0,7 2 1 3 1 No
ENAW 7021 -- -- AlZn5,5Mg1,5 2 2 3 2 Yes
Cast sawed precision milled plates (machined surface, protective foil on the both-sides) ENAW 5083 3.3547 PA13 AlMg4,5Mn0,7 2 1 3 1 No
ENAW 7021     AlZn5,5Mg1,5 2 2 3 2 Yes
Rolled plates (common rolled surface) ENAW 5754 3.3535 PA11 AlMg3 3 1 2 1 No
ENAW 5083 3.3547 PA13 AlMg4,5Mn0,7 2 1 3 1 No
ENAW 6061 -- -- AlMg1SiCu 1 1 3 2 Yes
ENAW 6082 3.2315 PA4 AlSiMgMn 1 1 3 2 Yes
ENAW 2017 3.1325 PA6 AlCuMg1 1 5 5 4 Yes
ENAW 2024 3.1355 -- AlCuMg2 1 5 5 4 Yes
ENAW 7022 3.4345 -- AlZn5Mg3Cu 1 4 5 5 Yes
ENAW 7075 3.4365 PA9 AlZn5,5MgCu 1 4 5 5 Yes
Rolled precision milled plates (machined surface, protective foil on the both-sides) ENAW 5754 3.3535 PA11 AlMg3 3 1 2 1 No
ENAW 5083 3.3547 PA13 AlMg4,5Mn0,7 2 1 3 1 No
ENAW 6082 3.2315 PA4 AlSiMgMn 1 1 3 2 Yes
ENAW 7019 -- -- AlZn4Mg2Mn 1 1 3 3 Yes
ENAW 7075 3.4365 PA9 AlZn5,5MgCu 1 4 5 5 Yes

 

 

 



EMPTY

KOSIK
loading